What are Access Modifiers in C#?
In C# there are 5 different types of Access Modifiers.
Public
The public type or member can be accessed by any other code in the same assembly or another assembly that references it.
Private
The type or member can only be accessed by code in the same class or struct.
Protected
The type or member can only be accessed by code in the same class or struct, or in a derived class.
Internal
The type or member can be accessed by any code in the same assembly, but not from another assembly.
Protected Internal
The type or member can be accessed by any code in the same assembly, or by any derived class in another assembly.
What are Access Modifiers used for?
Access Modifiers are used to control the accessibilty of types and members with in the types.
Can you use all access modifiers for all types?
No, Not all access modifiers can be used by all types or members in all contexts, and in some cases the accessibility of a type member is constrained by the accessibility of its containing type.
Can derived classes have greater accessibility than their base types?
No, Derived classes cannot have greater accessibility than their base types. For example the following code is illegal.
using System;
internal class InternalBaseClass
{
public void Print()
{
Console.WriteLine("I am a Base Class Method");
}
}
public class PublicDerivedClass : InternalBaseClass
{
public static void Main()
{
Console.WriteLine("I am a Public Derived Class Method");
}
}
When you compile the above code an error will be generated stating "Inconsistent accessibility: base class InternalBaseClass is less accessible than class PublicDerivedClass".To make this simple, you cannot have a public class B that derives from an internal class A. If this were allowed, it would have the effect of making A public, because all protected or internal members of A are accessible from the derived class.
Is the following code legal?
using System;
private class Test
{
public static void Main()
{
}
}
No, a compile time error will be generated stating "Namespace elements cannot be explicitly declared as private, protected, or protected internal"
Can you declare struct members as protected?
No, struct members cannot be declared protected. This is because structs do not support inheritance.
Can the accessibility of a type member be greater than the accessibility of its containing type?
No, the accessibility of a type member can never be greater than the accessibility of its containing type. For example, a public method declared in an internal class has only internal accessibility.
Can destructors have access modifiers?
No, destructors cannot have access modifiers.
What does protected internal access modifier mean?
The protected internal access means protected OR internal, not protected AND internal. In simple terms, a protected internal member is accessible from any class in the same assembly, including derived classes. To limit accessibility to only derived classes in the same assembly, declare the class itself internal, and declare its members as protected.
What is the default access modifier for a class,struct and an interface declared directly with a namespace?
internal
Will the following code compile?
using System;
interface IExampleInterface
{
public void Save();
}
No, you cannot specify access modifer for an interface member. Interface members are always public.
Can you specify an access modifier for an enumeration?
Enumeration members are always public, and no access modifiers can be specified.
Untitled Page
!doctype>
Saturday, November 21, 2009
C# Interview Questions on Properties
What are Properties in C#. Explain with an example?
Properties in C# are class members that provide a flexible mechanism to read, write, or compute the values of private fields. Properties can be used as if they are public data members, but they are actually special methods called accessors. This enables data to be accessed easily and still helps promote the safety and flexibility of methods.
In the example below _firstName and _lastName are private string variables which are accessible only inside the Customer class. _firstName and _lastName are exposed using FirstName and LastName public properties respectively. The get property accessor is used to return the property value, and a set accessor is used to assign a new value. These accessors can have different access levels. The value keyword is used to define the value being assigned by the set accessor. The FullName property computes the full name of the customer. Full Name property is readonly, because it has only the get accessor. Properties that do not implement a set accessor are read only.
The code block for the get accessor is executed when the property is read and the code block for the set accessor is executed when the property is assigned a new value.
using System;
class Customer
{
// Private fileds not accessible outside the class.
private string _firstName = string.Empty;
private string _lastName = string.Empty;
private string _coutry = string.Empty;
// public FirstName property exposes _firstName variable
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
// public LastName property exposes _lastName variable
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName property is readonly and computes customer full name.
public string FullName
{
get
{
return _lastName + ", " + _firstName;
}
}
//Country Property is Write Only
public string Country
{
set
{
_coutry = value;
}
}
}
class MainClass
{
public static void Main()
{
Customer CustomerObject = new Customer();
//This line will call the set accessor of FirstName Property
CustomerObject.FirstName = "David";
//This line will call the set accessor of LastName Property
CustomerObject.LastName = "Boon";
//This line will call the get accessor of FullName Property
Console.WriteLine("Customer Full Name is : " + CustomerObject.FullName);
}
}
Explain the 3 types of properties in C# with an example?
1. Read Only Properties: Properties without a set accessor are considered read-only. In the above example FullName is read only property.
2. Write Only Properties: Properties without a get accessor are considered write-only. In the above example Country is write only property.
3. Read Write Properties: Properties with both a get and set accessor are considered read-write properties. In the above example FirstName and LastName are read write properties.
What are the advantages of properties in C#?
1. Properties can validate data before allowing a change.
2. Properties can transparently expose data on a class where that data is actually retrieved from some other source such as a database.
3. Properties can take an action when data is changed, such as raising an event or changing the value of other fields.
What is a static property. Give an example?
A property that is marked with a static keyword is considered as static property. This makes the property available to callers at any time, even if no instance of the class exists. In the example below PI is a static property.
using System;
class Circle
{
private static double _pi = 3.14;
public static double PI
{
get
{
return _pi;
}
}
}
class MainClass
{
public static void Main()
{
Console.WriteLine(Circle.PI);
}
}
What is a virtual property. Give an example?
A property that is marked with virtual keyword is considered virtual property. Virtual properties enable derived classes to override the property behavior by using the override keyword. In the example below FullName is virtual property in the Customer class. BankCustomer class inherits from Customer class and overrides the FullName virtual property. In the output you can see the over riden implementation. A property overriding a virtual property can also be sealed, specifying that for derived classes it is no longer virtual.
using System;
class Customer
{
private string _firstName = string.Empty;
private string _lastName = string.Empty;
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName is virtual
public virtual string FullName
{
get
{
return _lastName + ", " + _firstName;
}
}
}
class BankCustomer : Customer
{
// Overiding the FullName virtual property derived from customer class
public override string FullName
{
get
{
return "Mr. " + FirstName + " " + LastName;
}
}
}
class MainClass
{
public static void Main()
{
BankCustomer BankCustomerObject = new BankCustomer();
BankCustomerObject.FirstName = "David";
BankCustomerObject.LastName = "Boon";
Console.WriteLine("Customer Full Name is : " + BankCustomerObject.FullName);
}
}
What is an abstract property. Give an example?
A property that is marked with abstract keyword is considered abstract property. An abstract property should not have any implementation in the class. The derived classes must write their own implementation. In the example below FullName property is abstract in the Customer class. BankCustomer class overrides the inherited abstract FullName property with its own implementation.
using System;
abstract class Customer
{
private string _firstName = string.Empty;
private string _lastName = string.Empty;
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName is abstract
public abstract string FullName
{
get;
}
}
class BankCustomer : Customer
{
// Overiding the FullName abstract property derived from customer class
public override string FullName
{
get
{
return "Mr. " + FirstName + " " + LastName;
}
}
}
class MainClass
{
public static void Main()
{
BankCustomer BankCustomerObject = new BankCustomer();
BankCustomerObject.FirstName = "David";
BankCustomerObject.LastName = "Boon";
Console.WriteLine("Customer Full Name is : " + BankCustomerObject.FullName);
}
}
Can you use virtual, override or abstract keywords on an accessor of a static property?
No, it is a compile time error to use a virtual, abstract or override keywords on an accessor of a static property.
Properties in C# are class members that provide a flexible mechanism to read, write, or compute the values of private fields. Properties can be used as if they are public data members, but they are actually special methods called accessors. This enables data to be accessed easily and still helps promote the safety and flexibility of methods.
In the example below _firstName and _lastName are private string variables which are accessible only inside the Customer class. _firstName and _lastName are exposed using FirstName and LastName public properties respectively. The get property accessor is used to return the property value, and a set accessor is used to assign a new value. These accessors can have different access levels. The value keyword is used to define the value being assigned by the set accessor. The FullName property computes the full name of the customer. Full Name property is readonly, because it has only the get accessor. Properties that do not implement a set accessor are read only.
The code block for the get accessor is executed when the property is read and the code block for the set accessor is executed when the property is assigned a new value.
using System;
class Customer
{
// Private fileds not accessible outside the class.
private string _firstName = string.Empty;
private string _lastName = string.Empty;
private string _coutry = string.Empty;
// public FirstName property exposes _firstName variable
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
// public LastName property exposes _lastName variable
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName property is readonly and computes customer full name.
public string FullName
{
get
{
return _lastName + ", " + _firstName;
}
}
//Country Property is Write Only
public string Country
{
set
{
_coutry = value;
}
}
}
class MainClass
{
public static void Main()
{
Customer CustomerObject = new Customer();
//This line will call the set accessor of FirstName Property
CustomerObject.FirstName = "David";
//This line will call the set accessor of LastName Property
CustomerObject.LastName = "Boon";
//This line will call the get accessor of FullName Property
Console.WriteLine("Customer Full Name is : " + CustomerObject.FullName);
}
}
Explain the 3 types of properties in C# with an example?
1. Read Only Properties: Properties without a set accessor are considered read-only. In the above example FullName is read only property.
2. Write Only Properties: Properties without a get accessor are considered write-only. In the above example Country is write only property.
3. Read Write Properties: Properties with both a get and set accessor are considered read-write properties. In the above example FirstName and LastName are read write properties.
What are the advantages of properties in C#?
1. Properties can validate data before allowing a change.
2. Properties can transparently expose data on a class where that data is actually retrieved from some other source such as a database.
3. Properties can take an action when data is changed, such as raising an event or changing the value of other fields.
What is a static property. Give an example?
A property that is marked with a static keyword is considered as static property. This makes the property available to callers at any time, even if no instance of the class exists. In the example below PI is a static property.
using System;
class Circle
{
private static double _pi = 3.14;
public static double PI
{
get
{
return _pi;
}
}
}
class MainClass
{
public static void Main()
{
Console.WriteLine(Circle.PI);
}
}
What is a virtual property. Give an example?
A property that is marked with virtual keyword is considered virtual property. Virtual properties enable derived classes to override the property behavior by using the override keyword. In the example below FullName is virtual property in the Customer class. BankCustomer class inherits from Customer class and overrides the FullName virtual property. In the output you can see the over riden implementation. A property overriding a virtual property can also be sealed, specifying that for derived classes it is no longer virtual.
using System;
class Customer
{
private string _firstName = string.Empty;
private string _lastName = string.Empty;
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName is virtual
public virtual string FullName
{
get
{
return _lastName + ", " + _firstName;
}
}
}
class BankCustomer : Customer
{
// Overiding the FullName virtual property derived from customer class
public override string FullName
{
get
{
return "Mr. " + FirstName + " " + LastName;
}
}
}
class MainClass
{
public static void Main()
{
BankCustomer BankCustomerObject = new BankCustomer();
BankCustomerObject.FirstName = "David";
BankCustomerObject.LastName = "Boon";
Console.WriteLine("Customer Full Name is : " + BankCustomerObject.FullName);
}
}
What is an abstract property. Give an example?
A property that is marked with abstract keyword is considered abstract property. An abstract property should not have any implementation in the class. The derived classes must write their own implementation. In the example below FullName property is abstract in the Customer class. BankCustomer class overrides the inherited abstract FullName property with its own implementation.
using System;
abstract class Customer
{
private string _firstName = string.Empty;
private string _lastName = string.Empty;
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
}
}
public string LastName
{
get
{
return _lastName;
}
set
{
_lastName = value;
}
}
// FullName is abstract
public abstract string FullName
{
get;
}
}
class BankCustomer : Customer
{
// Overiding the FullName abstract property derived from customer class
public override string FullName
{
get
{
return "Mr. " + FirstName + " " + LastName;
}
}
}
class MainClass
{
public static void Main()
{
BankCustomer BankCustomerObject = new BankCustomer();
BankCustomerObject.FirstName = "David";
BankCustomerObject.LastName = "Boon";
Console.WriteLine("Customer Full Name is : " + BankCustomerObject.FullName);
}
}
Can you use virtual, override or abstract keywords on an accessor of a static property?
No, it is a compile time error to use a virtual, abstract or override keywords on an accessor of a static property.
C# Interview Questions on value types and reference types
What are the 2 types of data types available in C#?
1. Value Types
2. Reference Types
If you define a user defined data type by using the struct keyword, Is it a a value type or reference type?
Value Type
If you define a user defined data type by using the class keyword, Is it a a value type or reference type?
Reference type
Are Value types sealed?
Yes, Value types are sealed.
What is the base class from which all value types are derived?
System.ValueType
Give examples for value types?
Enum
Struct
Give examples for reference types?
Class
Delegate
Array
Interface
What are the differences between value types and reference types?
1. Value types are stored on the stack where as reference types are stored on the managed heap.
2. Value type variables directly contain their values where as reference variables holds only a reference to the location of the object that is created on the managed heap.
3. There is no heap allocation or garbage collection overhead for value-type variables. As reference types are stored on the managed heap, they have the over head of object allocation and garbage collection.
4. Value Types cannot inherit from another class or struct. Value types can only inherit from interfaces. Reference types can inherit from another class or interface.
1. Value Types
2. Reference Types
If you define a user defined data type by using the struct keyword, Is it a a value type or reference type?
Value Type
If you define a user defined data type by using the class keyword, Is it a a value type or reference type?
Reference type
Are Value types sealed?
Yes, Value types are sealed.
What is the base class from which all value types are derived?
System.ValueType
Give examples for value types?
Enum
Struct
Give examples for reference types?
Class
Delegate
Array
Interface
What are the differences between value types and reference types?
1. Value types are stored on the stack where as reference types are stored on the managed heap.
2. Value type variables directly contain their values where as reference variables holds only a reference to the location of the object that is created on the managed heap.
3. There is no heap allocation or garbage collection overhead for value-type variables. As reference types are stored on the managed heap, they have the over head of object allocation and garbage collection.
4. Value Types cannot inherit from another class or struct. Value types can only inherit from interfaces. Reference types can inherit from another class or interface.
C Sharp interview questions (FAQ'S) on Struct
Will the following code compile?
using System;
public class Example
{
static void Main()
{
TestStruct T = new TestStruct();
Console.WriteLine(T.i);
}
}
public struct TestStruct
{
public int i=10;
//Error: cannot have instance field initializers in structs
}
No, a compile time error will be generated stating "within a struct declaration, fields cannot be initialized unless they are declared as const or static"
Can a struct have a default constructor (a constructor without parameters) or a destructor in C#?
No
Can you instantiate a struct without using a new operator in C#?
Yes, you can instantiate a struct without using a new operator
Can a struct inherit from another struct or class in C#?
No, a struct cannot inherit from another struct or class, and it cannot be the base of a class.
Can a struct inherit from an interface in C#?
Yes
Are structs value types or reference types?
Structs are value types.
What is the base type from which all structs inherit directly?
All structs inherit directly from System.ValueType, which inherits from System.Object.
using System;
public class Example
{
static void Main()
{
TestStruct T = new TestStruct();
Console.WriteLine(T.i);
}
}
public struct TestStruct
{
public int i=10;
//Error: cannot have instance field initializers in structs
}
No, a compile time error will be generated stating "within a struct declaration, fields cannot be initialized unless they are declared as const or static"
Can a struct have a default constructor (a constructor without parameters) or a destructor in C#?
No
Can you instantiate a struct without using a new operator in C#?
Yes, you can instantiate a struct without using a new operator
Can a struct inherit from another struct or class in C#?
No, a struct cannot inherit from another struct or class, and it cannot be the base of a class.
Can a struct inherit from an interface in C#?
Yes
Are structs value types or reference types?
Structs are value types.
What is the base type from which all structs inherit directly?
All structs inherit directly from System.ValueType, which inherits from System.Object.
C Sharp interview questions - part 2
Give Some Examples of Generic Classes?
List,Queue,Stack,LinkedList,HashSet
Generic Collections are located in which NameSpace?
System.Collections.Generic
Object type collections are located in the which NameSpace?
System.Collections
What does the modifier protected internal in C# mean?
The Protected Internal can be accessed by Members of the Assembly or the inheriting class, and of course, within the class itself.
What is the Global.asax used for?
The Global.asax (including the Global.asax.cs file) is used to implement application and session level events.
What are the Application_Start and Session_Start subroutines used for?
This is where you can set the specific variables for the Application and Session objects.
How many classes can a single .NET DLL contain?
It can contain many classes.
What base class do all Web Forms inherit from?
The Page class.
What’s the .NET datatype that allows the retrieval of data by a unique key?
Ans. HashTable.
Can you edit data in the Repeater control?
No, it just reads the information from its data source.
When during the page processing cycle is ViewState available?
After the Init() and before the Page_Load(), or OnLoad() for a control.
What’s class SortedList underneath?
Ans. A sorted HashTable.
List
Generic Collections are located in which NameSpace?
System.Collections.Generic
Object type collections are located in the which NameSpace?
System.Collections
What does the modifier protected internal in C# mean?
The Protected Internal can be accessed by Members of the Assembly or the inheriting class, and of course, within the class itself.
What is the Global.asax used for?
The Global.asax (including the Global.asax.cs file) is used to implement application and session level events.
What are the Application_Start and Session_Start subroutines used for?
This is where you can set the specific variables for the Application and Session objects.
How many classes can a single .NET DLL contain?
It can contain many classes.
What base class do all Web Forms inherit from?
The Page class.
What’s the .NET datatype that allows the retrieval of data by a unique key?
Ans. HashTable.
Can you edit data in the Repeater control?
No, it just reads the information from its data source.
When during the page processing cycle is ViewState available?
After the Init() and before the Page_Load(), or OnLoad() for a control.
What’s class SortedList underneath?
Ans. A sorted HashTable.
Thursday, November 19, 2009
C# interview FAQ's on constructors
What is a constructor in C#?
Constructor is a class method that is executed when an object of a class is created. Constructor has the same name as the class, and usually used to initialize the data members of the new object.
In a simple words Constructor is nothing but a method, a special kind of method of a class, which gets executed when its (class) object is created.
Structs are not reference types. Can structs have constructors?
Yes, even though Structs are not reference types, structs can have constructors.
We cannot create instances of static classes. Can we have constructors for static classes?
Yes, static classes can also have constructors.
Can you prevent a class from being instantiated?
Yes, a class can be prevented from being instantiated by using a private constructor as shown in the example below.
using System;
namespace TestConsole
{
class Program
{
public static void Main()
{
//Error cannot create instance of a class with private constructor
SampleClass SC = new SampleClass();
}
}
class SampleClass
{
double PI = 3.141;
private SampleClass()
{
}
}
}
In C#, What will happen if you do not explicitly provide a constructor for a class?
If you do not provide a constructor explicitly for your class, C# will create one by default that instantiates the object and sets all the member variables to their default values.
Can a class or a struct have multiple constructors?
Yes, a class or a struct can have multiple constructors. Constructors in csharp can be overloaded.
Can a child class call the constructor of a base class?
Yes, a child class can call the constructor of a base class by using the base keyword as shown in the example below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
public ChildClass(string str): base(str)
{
}
public static void Main()
{
ChildClass CC = new ChildClass("Calling base class constructor from child class");
}
}
}
If a child class instance is created, which class constructor is called first - base class or child class?
When an instance of a child class is created, the base class constructor is called before the child class constructor. An example is shown below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass()
{
Console.WriteLine("I am a base class constructor");
}
}
class ChildClass : BaseClass
{
public ChildClass()
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
Will the following code compile?
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
public ChildClass()
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
No, the above code will not compile. This is because, if a base class does not offer a default constructor, the derived class must make an explicit call to a base class constructor by using the base keyword as shown in the example below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
//Call the base class contructor from child class
public ChildClass() : base("A call to base class constructor")
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
Can a class have static constructor?
Yes, a class can have static constructor. Static constructors are called automatically, immediately before any static fields are accessed, and are generally used to initialize static class members. It is called automatically before the first instance is created or any static members are referenced. Static constructors are called before instance constructors. An example is shown below.
using System;
namespace TestConsole
{
class Program
{
static int I;
static Program()
{
I = 100;
Console.WriteLine("Static Constructor called");
}
public Program()
{
Console.WriteLine("Instance Constructor called");
}
public static void Main()
{
Program P = new Program();
}
}
}
Can you mark static constructor with access modifiers?
No, we cannot use access modifiers on static constructor.
Can you have parameters for static constructors?
No, static constructors cannot have parameters.
What happens if a static constructor throws an exception?
If a static constructor throws an exception, the runtime will not invoke it a second time, and the type will remain uninitialized for the lifetime of the application domain in which your program is running.
Give 2 scenarios where static constructors can be used?
1. A typical use of static constructors is when the class is using a log file and the constructor is used to write entries to this file.
2. Static constructors are also useful when creating wrapper classes for unmanaged code, when the constructor can call the LoadLibrary method.
Does C# provide copy constructor?
No, C# does not provide copy constructor.
Constructor is a class method that is executed when an object of a class is created. Constructor has the same name as the class, and usually used to initialize the data members of the new object.
In a simple words Constructor is nothing but a method, a special kind of method of a class, which gets executed when its (class) object is created.
Structs are not reference types. Can structs have constructors?
Yes, even though Structs are not reference types, structs can have constructors.
We cannot create instances of static classes. Can we have constructors for static classes?
Yes, static classes can also have constructors.
Can you prevent a class from being instantiated?
Yes, a class can be prevented from being instantiated by using a private constructor as shown in the example below.
using System;
namespace TestConsole
{
class Program
{
public static void Main()
{
//Error cannot create instance of a class with private constructor
SampleClass SC = new SampleClass();
}
}
class SampleClass
{
double PI = 3.141;
private SampleClass()
{
}
}
}
In C#, What will happen if you do not explicitly provide a constructor for a class?
If you do not provide a constructor explicitly for your class, C# will create one by default that instantiates the object and sets all the member variables to their default values.
Can a class or a struct have multiple constructors?
Yes, a class or a struct can have multiple constructors. Constructors in csharp can be overloaded.
Can a child class call the constructor of a base class?
Yes, a child class can call the constructor of a base class by using the base keyword as shown in the example below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
public ChildClass(string str): base(str)
{
}
public static void Main()
{
ChildClass CC = new ChildClass("Calling base class constructor from child class");
}
}
}
If a child class instance is created, which class constructor is called first - base class or child class?
When an instance of a child class is created, the base class constructor is called before the child class constructor. An example is shown below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass()
{
Console.WriteLine("I am a base class constructor");
}
}
class ChildClass : BaseClass
{
public ChildClass()
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
Will the following code compile?
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
public ChildClass()
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
No, the above code will not compile. This is because, if a base class does not offer a default constructor, the derived class must make an explicit call to a base class constructor by using the base keyword as shown in the example below.
using System;
namespace TestConsole
{
class BaseClass
{
public BaseClass(string str)
{
Console.WriteLine(str);
}
}
class ChildClass : BaseClass
{
//Call the base class contructor from child class
public ChildClass() : base("A call to base class constructor")
{
Console.WriteLine("I am a child class constructor");
}
public static void Main()
{
ChildClass CC = new ChildClass();
}
}
}
Can a class have static constructor?
Yes, a class can have static constructor. Static constructors are called automatically, immediately before any static fields are accessed, and are generally used to initialize static class members. It is called automatically before the first instance is created or any static members are referenced. Static constructors are called before instance constructors. An example is shown below.
using System;
namespace TestConsole
{
class Program
{
static int I;
static Program()
{
I = 100;
Console.WriteLine("Static Constructor called");
}
public Program()
{
Console.WriteLine("Instance Constructor called");
}
public static void Main()
{
Program P = new Program();
}
}
}
Can you mark static constructor with access modifiers?
No, we cannot use access modifiers on static constructor.
Can you have parameters for static constructors?
No, static constructors cannot have parameters.
What happens if a static constructor throws an exception?
If a static constructor throws an exception, the runtime will not invoke it a second time, and the type will remain uninitialized for the lifetime of the application domain in which your program is running.
Give 2 scenarios where static constructors can be used?
1. A typical use of static constructors is when the class is using a log file and the constructor is used to write entries to this file.
2. Static constructors are also useful when creating wrapper classes for unmanaged code, when the constructor can call the LoadLibrary method.
Does C# provide copy constructor?
No, C# does not provide copy constructor.
Thursday, October 22, 2009
C# Interview Questions(FAQ'S) on partial classes, structs and methods.
What is a partial class. Give an example?
A partial class is a class whose definition is present in 2 or more files. Each source file contains a section of the class, and all parts are combined when the application is compiled. To split a class definition, use the partial keyword as shown in the example below. Student class is split into 2 parts. The first part defines the study() method and the second part defines the Play() method. When we compile this program both the parts will be combined and compiled. Note that both the parts uses partial keyword and public access modifier.
using System;
namespace PartialClass
{
public partial class Student
{
public void Study()
{
Console.WriteLine("I am studying");
}
}
public partial class Student
{
public void Play()
{
Console.WriteLine("I am Playing");
}
}
public class Demo
{
public static void Main()
{
Student StudentObject = new Student();
StudentObject.Study();
StudentObject.Play();
}
}
}
It is very important to keep the following points in mind when creating partial classes.
1. All the parts must use the partial keyword.
2. All the parts must be available at compile time to form the final class.
3. All the parts must have the same access modifiers - public, private, protected etc.
4. Any class members declared in a partial definition are available to all the other parts.
5. The final class is the combination of all the parts at compile time.
What are the advantages of using partial classes?
1. When working on large projects, spreading a class over separate files enables multiple programmers to work on it at the same time.
2. When working with automatically generated source, code can be added to the class without having to recreate the source file. Visual Studio uses this approach when it creates Windows Forms, Web service wrapper code, and so on. You can create code that uses these classes without having to modify the file created by Visual Studio.
Is it possible to create partial structs, interfaces and methods?
Yes, it is possible to create partial structs, interfaces and methods. We can create partial structs, interfaces and methods the same way as we create partial classes.
Will the following code compile?
using System;
namespace PartialClass
{
public partial class Student
{
public void Study()
{
Console.WriteLine("I am studying");
}
}
public abstract partial class Student
{
public void Play()
{
Console.WriteLine("I am Playing");
}
}
public class Demo
{
public static void Main()
{
Student StudentObject = new Student();
}
}
}
No, a compile time error will be generated stating "Cannot create an instance of the abstract class or interface "PartialClass.Student". This is because, if any part is declared abstract, then the whole class becomes abstract. Similarly if any part is declared sealed, then the whole class becomes sealed and if any part declares a base class, then the whole class inherits that base class.
Can you create partial delegates and enumerations?
No, you cannot create partial delegates and enumerations.
Can different parts of a partial class inherit from different interfaces?
Yes, different parts of a partial class can inherit from different interfaces.
Can you specify nested classes as partial classes?
Yes, nested classes can be specified as partial classes even if the containing class is not partial. An example is shown below.
class ContainerClass
{
public partial class Nested
{
void Test1() { }
}
public partial class Nested
{
void Test2() { }
}
}
How do you create partial methods?
To create a partial method we create the declaration of the method in one part of the partial class and implementation in the other part of the partial class. The implementation is optional. If the implementation is not provided, then the method and all the calls to the method are removed at compile time. Therefore, any code in the partial class can freely use a partial method, even if the implementation is not supplied. No compile-time or run-time errors will result if the method is called but not implemented. In summary a partial method declaration consists of two parts. The definition, and the implementation. These may be in separate parts of a partial class, or in the same part. If there is no implementation declaration, then the compiler optimizes away both the defining declaration and all calls to the method.
The following are the points to keep in mind when creating partial methods.
1. Partial method declarations must begin partial keyword.
2. The return type of a partial method must be void.
3. Partial methods can have ref but not out parameters.
4. Partial methods are implicitly private, and therefore they cannot be virtual.
5. Partial methods cannot be extern, because the presence of the body determines whether they are defining or implementing.
What is the use of partial methods?
Partial methods can be used to customize generated code. They allow for a method name and signature to be reserved, so that generated code can call the method but the developer can decide whether to implement the method. Much like partial classes, partial methods enable code created by a code generator and code created by a human developer to work together without run-time costs.
A partial class is a class whose definition is present in 2 or more files. Each source file contains a section of the class, and all parts are combined when the application is compiled. To split a class definition, use the partial keyword as shown in the example below. Student class is split into 2 parts. The first part defines the study() method and the second part defines the Play() method. When we compile this program both the parts will be combined and compiled. Note that both the parts uses partial keyword and public access modifier.
using System;
namespace PartialClass
{
public partial class Student
{
public void Study()
{
Console.WriteLine("I am studying");
}
}
public partial class Student
{
public void Play()
{
Console.WriteLine("I am Playing");
}
}
public class Demo
{
public static void Main()
{
Student StudentObject = new Student();
StudentObject.Study();
StudentObject.Play();
}
}
}
It is very important to keep the following points in mind when creating partial classes.
1. All the parts must use the partial keyword.
2. All the parts must be available at compile time to form the final class.
3. All the parts must have the same access modifiers - public, private, protected etc.
4. Any class members declared in a partial definition are available to all the other parts.
5. The final class is the combination of all the parts at compile time.
What are the advantages of using partial classes?
1. When working on large projects, spreading a class over separate files enables multiple programmers to work on it at the same time.
2. When working with automatically generated source, code can be added to the class without having to recreate the source file. Visual Studio uses this approach when it creates Windows Forms, Web service wrapper code, and so on. You can create code that uses these classes without having to modify the file created by Visual Studio.
Is it possible to create partial structs, interfaces and methods?
Yes, it is possible to create partial structs, interfaces and methods. We can create partial structs, interfaces and methods the same way as we create partial classes.
Will the following code compile?
using System;
namespace PartialClass
{
public partial class Student
{
public void Study()
{
Console.WriteLine("I am studying");
}
}
public abstract partial class Student
{
public void Play()
{
Console.WriteLine("I am Playing");
}
}
public class Demo
{
public static void Main()
{
Student StudentObject = new Student();
}
}
}
No, a compile time error will be generated stating "Cannot create an instance of the abstract class or interface "PartialClass.Student". This is because, if any part is declared abstract, then the whole class becomes abstract. Similarly if any part is declared sealed, then the whole class becomes sealed and if any part declares a base class, then the whole class inherits that base class.
Can you create partial delegates and enumerations?
No, you cannot create partial delegates and enumerations.
Can different parts of a partial class inherit from different interfaces?
Yes, different parts of a partial class can inherit from different interfaces.
Can you specify nested classes as partial classes?
Yes, nested classes can be specified as partial classes even if the containing class is not partial. An example is shown below.
class ContainerClass
{
public partial class Nested
{
void Test1() { }
}
public partial class Nested
{
void Test2() { }
}
}
How do you create partial methods?
To create a partial method we create the declaration of the method in one part of the partial class and implementation in the other part of the partial class. The implementation is optional. If the implementation is not provided, then the method and all the calls to the method are removed at compile time. Therefore, any code in the partial class can freely use a partial method, even if the implementation is not supplied. No compile-time or run-time errors will result if the method is called but not implemented. In summary a partial method declaration consists of two parts. The definition, and the implementation. These may be in separate parts of a partial class, or in the same part. If there is no implementation declaration, then the compiler optimizes away both the defining declaration and all calls to the method.
The following are the points to keep in mind when creating partial methods.
1. Partial method declarations must begin partial keyword.
2. The return type of a partial method must be void.
3. Partial methods can have ref but not out parameters.
4. Partial methods are implicitly private, and therefore they cannot be virtual.
5. Partial methods cannot be extern, because the presence of the body determines whether they are defining or implementing.
What is the use of partial methods?
Partial methods can be used to customize generated code. They allow for a method name and signature to be reserved, so that generated code can call the method but the developer can decide whether to implement the method. Much like partial classes, partial methods enable code created by a code generator and code created by a human developer to work together without run-time costs.
Thursday, August 13, 2009
C Sharp interview questions
What is Object Oriented Programming ?
It is a problem solving technique to develop software systems. It is a technique to think real world in terms of objects. Object maps the software model to real world concept. These objects have responsibilities and provide services to application or other objects.
What’s a Class ?
A class describes all the attributes of objects, as well as the methods that implement the behavior of member objects. It’s a comprehensive data type which represents a blue print of objects. It’s a template of object.
What’s an Object ?
It is a basic unit of a system. An object is an entity that has attributes, behavior, and identity. Objects are members of a class. Attributes and behavior of an object are defined by the class definition.
What is the relation between Classes and Objects ?
They look very much same but are not same. Class is a definition, while object is a
instance of the class created. Class is a blue print while objects are actual objects existing in real world. Example we have class CAR which has attributes and methods like Speed, Brakes, Type of Car etc. Class CAR is just a prototype, now we can create real time objects which can be used to provide functionality. Example we can create a Maruti car object with 100 km speed and urgent brakes.
What are different properties provided by Objectoriented systems ?
Abstraction
It allows complex real world to be represented in simplified manner. Example color is
abstracted to RGB. By just making the combination of these three colors we can achieve any color in world.It’s a model of real world or concept.
Encapsulation
It is a process of hiding all the internal details of an object from the outside world.
Communication using messages
When application wants to achieve certain task it can only be done using combination of objects. A single object can not do all the task. Example if we want to make order processing form.We will use Customer object, Order object, Product object and Payment object to achieve this functionality. In short these objects should communicate with each other. This is achieved when objects send messages to each other.
Object lifetime
All objects have life time.Objects are created ,and initialized, necessary functionalities are done and later the object is destroyed. Every object have there own state and identity which differ from instance to instance.
Class hierarchies (Inheritance and aggregation)
Twist :- What is difference between Association, Aggregation and Inheritance relationships?
In object oriented world objects have relation and hierarchies in between them. There are
basically three kind of relationship in Object Oriented world :-
Association
This is the simplest relationship between objects. Example every customer has sales. So Customer object and sales object have an association relation between them.
Aggregation
This is also called as composition model. Example in order to make a “Accounts” class it has use other objects example “Voucher”, “Journal” and “Cash” objects. So accounts class is aggregation of these three objects.
Inheritance
Hierarchy is used to define more specialized classes based on a preexisting generalized class. Example we have VEHICLE class and we can inherit this class make more specialized class like CAR, which will add new attributes and use some existing qualities of the parent class. Its shows more of a parent-child relationship. This kind of hierarchy is called inheritance.
Polymorphism
When inheritance is used to extend a generalized class to a more specialized class, it includes behavior of the top class(Generalized class). The inheriting class often implement a behavior that can be somewhat different than the generalized class, but the name of the behavior can be same. It is important that a given instance of an object use the correct behavior, and the property of polymorphism allows this to happen automatically.
It is a problem solving technique to develop software systems. It is a technique to think real world in terms of objects. Object maps the software model to real world concept. These objects have responsibilities and provide services to application or other objects.
What’s a Class ?
A class describes all the attributes of objects, as well as the methods that implement the behavior of member objects. It’s a comprehensive data type which represents a blue print of objects. It’s a template of object.
What’s an Object ?
It is a basic unit of a system. An object is an entity that has attributes, behavior, and identity. Objects are members of a class. Attributes and behavior of an object are defined by the class definition.
What is the relation between Classes and Objects ?
They look very much same but are not same. Class is a definition, while object is a
instance of the class created. Class is a blue print while objects are actual objects existing in real world. Example we have class CAR which has attributes and methods like Speed, Brakes, Type of Car etc. Class CAR is just a prototype, now we can create real time objects which can be used to provide functionality. Example we can create a Maruti car object with 100 km speed and urgent brakes.
What are different properties provided by Objectoriented systems ?
Abstraction
It allows complex real world to be represented in simplified manner. Example color is
abstracted to RGB. By just making the combination of these three colors we can achieve any color in world.It’s a model of real world or concept.
Encapsulation
It is a process of hiding all the internal details of an object from the outside world.
Communication using messages
When application wants to achieve certain task it can only be done using combination of objects. A single object can not do all the task. Example if we want to make order processing form.We will use Customer object, Order object, Product object and Payment object to achieve this functionality. In short these objects should communicate with each other. This is achieved when objects send messages to each other.
Object lifetime
All objects have life time.Objects are created ,and initialized, necessary functionalities are done and later the object is destroyed. Every object have there own state and identity which differ from instance to instance.
Class hierarchies (Inheritance and aggregation)
Twist :- What is difference between Association, Aggregation and Inheritance relationships?
In object oriented world objects have relation and hierarchies in between them. There are
basically three kind of relationship in Object Oriented world :-
Association
This is the simplest relationship between objects. Example every customer has sales. So Customer object and sales object have an association relation between them.
Aggregation
This is also called as composition model. Example in order to make a “Accounts” class it has use other objects example “Voucher”, “Journal” and “Cash” objects. So accounts class is aggregation of these three objects.
Inheritance
Hierarchy is used to define more specialized classes based on a preexisting generalized class. Example we have VEHICLE class and we can inherit this class make more specialized class like CAR, which will add new attributes and use some existing qualities of the parent class. Its shows more of a parent-child relationship. This kind of hierarchy is called inheritance.
Polymorphism
When inheritance is used to extend a generalized class to a more specialized class, it includes behavior of the top class(Generalized class). The inheriting class often implement a behavior that can be somewhat different than the generalized class, but the name of the behavior can be same. It is important that a given instance of an object use the correct behavior, and the property of polymorphism allows this to happen automatically.
Subscribe to:
Posts (Atom)